Binks bomba Pogo Plus

Las bombas de pistón de doble bola y doble efecto de la serie Pogo Plus están diseñadas para la aplicación y transferencia de fluidos de baja y media viscosidad. Los modelos están disponibles en acero inoxidable con empaques de PTFE o UHMWE y son compatibles con una amplia variedad de materiales que incluyen pinturas y adhesivos a base de agua o solventes y la mayoría de los solventes. Las bombas Pogo Plus tienen una relación 4: 1 y están disponibles con presiones máximas de 290 psi o 500 psi.

PX1304 POGO Pump Assemblies

	PX-1304-5U	PX1304-5P	PX1304-8U	PX1304-8P
Pressure Ratio	4:1	4:1	4:1	4:1
Air Inlet Pressure  (Bar)	0-72.5 psi (5)	0-72.5 psi (5)	0-116 psi (8)	0-116 psi (8)
Pluid Pressure (Bar)	0-290 PSI (20)	0-290 PSI (20)	0-500 PSI (34)	0-500 PSI (34)
Cycles per gallon	47	47	47	47
Displacement per Cycle	2.7 (81 cc)	2.7 (81 cc)	2.7 (81 cc)	2.7 (81 cc)
Flow @ 60 Cycles/Min	1.3 gal (4.91 l/M)	1.3 gal (4.91 l/M)	1.3 gal (4.91 l/M)	1.3 gal (4.91 l/M)
Packing MaterialUHMW	UHMW	PTFE	UHMW	PTFE

Binks Pogo Plus Pump

AX55S Air Motor Assembly

ITEM NO.	PART NUMBER	DESCRIPTION	QTY.
1	0115-010023	†	EXHAUST COVER SCREEN	1
2	0115-010022	†	EXHAUST COVER	1
3	0115-010026	†∆	BUTTON HEAD CAP SCREW	4
4	0115-010073	†∆	BUTTON HEAD CAP SCREW	8
5	0115-010019	†	QUICK EXHAUST VALVE CAGE	2
6	0115-010021	†•◊N	O-RING	2
7	0115-010020	†•N	DIAPHRAGM	2
8	0115-010024	†	FLAT HEAD CAP SCREW	4
9	0115-010097	†	VALVE BLOCK	1
10	0115-010107	†∆	PIPE PLUG	1
11	0115-010018	†N	VALVE BLOCK END CAP	2
13	0115-010017	†N	MAGNET	2
14	0115-010016	†•N	BUMPER	2
15	0115-010015	†N	SPOOL AND SLEEVE ASSEMBLY	1
16	0114-014716	†	MINI BLOW-OFF VALVE (5 BAR)	AX55S-5	1
193538	MINI BLOW-OFF VALVE (6 BAR)	AX55S-6
193539	MINI BLOW-OFF VALVE (7 BAR)	AX55S-7
0114-014774	MINI BLOW-OFF VALVE (8 BAR)	AX55S
17	0115-010049	†•◊N	O-RING	4
18	0115-010051	•◊N	O-RING	4
19	0115-010037	•	POPPET ASSEMBLY	2
20	0115-010004	UPPER END CAP MACHINING	1
21	0115-010029	∆	SOCKET HEAD CAP SCREW	4
22	0115-010086	•◊	CYLINDER SEAL, 55mm	2
23	0115-010007	CYLINDER, 55mm	1
24	0115-010096	∆	LOCKNUT	1
25	0115-010036	•◊	SEALING RING	1
26	0115-010035	∆	FLAT WASHER	2
27	0115-010085	PISTON, 55mm	1
28	0115-010025	•◊	PISTON SEAL, 55mm	1
29	0115-010034	MOTOR ROD	1
30	0115-010006	LOWER END CAP MACHINING	1
31	0115-010657	•	MOTOR ROD CARTRIDGE ASSEMBLY	1
† Items available separately or as a complete assembly: 0115-010660. Parts are included in 0115-010214 AX55 Repair Kit. ◊ Parts are included in 0115-010216 AX55 Seal Kit. N Parts are included in 0115-010226 Air Motor Valve Repair Kit. ∆ Parts are included in 0115-010213 AX55 Hardware Kit.

ITEM NO.	PART NUMBER	DESCRIPTION	PX1304-5P	PX1304-5U	PX1304-8U	PX1304-8P	SERVICE MANUAL
1	0114-014351	HANDLE	1	1	1	1
2	0115-010272	RETAINING RING	2	2	2	2
3	0115-010001	SOCKET HEAD CAP SCREW	3	3	3	3
4	AX55S	AX55S AIR MOTOR (8 BAR)	–	–	1	1	77-2968
AX55S-5	AX55S AIR MOTOR (5 BAR)	1	1	–	–
5	0115-010099	ROD CLIP	2	2	2	2
6	41-28326	TIE ROD (6″ OAL)	3	3	3	3
41-28327	TIE ROD (8″ OAL)	3	3	3	3
7	41-28300	MOTOR ROD ADAPTER	1	1	1	1
8	PFX13P	POGO FLUID SECTION (PTFE)	1	–	–	1	77-3039
PFX13U	POGO FLUID SECTION (UHMW)	–	1	1	–
9	0114-016243	GROUND WIRE KIT	1	1	1	1
10	41-28347	UPPER GUARD	1	1	1	1
11	41-28348	LOWER GUARD	1	1	1	1
12	41-166001	SET SCREW	3	3	3	3

ITEM NO.	PART NUMBER	DESCRIPTION	98-3062	98-3063	SERVICE MANUAL
1	41-28272	AIR CONTROL ASSEMBLY	1	1
2	2101-4308-2	2100 GUN (565 X 66SS X 66SD-3)	1	–	77-3046
2465-18CN-11S0	TROPHY GUN (1.8mm X 11C)	–	1	77-3026
3	54-4976	TUBE CONNECTOR	1	1
4	20-3815	BUSHING, S.S.	1	1
5	83-2055	DM NIPPLE, S.S.	1	1
6	41-28331	POGO BUNG ADAPTER KIT	1	1
7	71-4803	AIR TUBING, 28 FT	1	1
8	71-3303	FLUID HOSE ASSEMBLY, 25FT	1	1
9	PX1304-5U	POGO PUMP ASSEMBLY (UHMW, 300 PSI)	1	1

ITEM NO.	PART NUMBER	DESCRIPTION	QTY
1	VA-542	BALL VALVE	1
2	SSP-1941-ZN	STREET ELBOW, 1/4″ NPT	1
3	SSP-3301-NI	1/4″ PIPE CROSS	1
4	20-4355-1	CLOSE NIPPLE 1/4″	2
5	59-369	PRESSURE GAUGE 0-60	1
6	85-521	PUSHLOCK SWIVEL ELBOW 3/8 OD TUBE X 1/4″ NPT	1
7	HAR-503-2	MINI REGULATOR	2
8		1/8″ PIPE PLUG (INCLUDED W/HAR-503-2)	2
9	20-4468	SWIVEL 1/4 NPT	1
10	0115-010157	MOUNTING STUD	1
11	85-516	PUSHLOCK SWIVEL ELBOW 1/2 OD TUBE X 3/8″ NPT	1
12	71-4876	AIR TUBING, 15″	1
13	85-519	PUSHLOCK SWIVEL ELBOW 1/2 OD TUBE X 1/4″ NPT	1
14	GA-338	PRESSURE GAUGE 0-160	1

PFX13 Fluid Pump Assemblies

ITEM NO.	PART NO.	DESCRIPTION	QTY.
1	0115-010227	SOCKET HEAD CAP SCREW, M8 X 25mm, PLATED	3
2	41-28325	TIE ROD FLANGE	1
3	A13505-00 ●◊	EXTENSION SHAFT GUIDE RING	1
4	41-28319	OUTLET ASSEMBLY	1
5	0115-010161 ◊	U-CUP SEAL (UHMW)	2
41-28329 ●	U-CUP SEAL (PTFE)	2
6	20-6956 ●◊	RETAINING RING	1
7	41-28302	ROD EXTENDER	1
8	41-28330 ●◊	WIRE CLIP	1
9	41-28303	PUMP ROD	1
10	20-6948 ●◊	RETAINING RING	1
11	0114-014022 ●◊	10 mm BALL	1
12	41-28324	SEAT WASHER	1
13	41-28307	PISTON SEAT	1
14	41-28301	CYLINDER	1
15	0114-014025 ●◊	18 mm BALL	1
16	20-6947 ●◊	DOWEL PIN, 3/16D X 1 3/8 LONG, SS	1
17	41-28323	BALL CAGE AND SEAT	1

• Parts are included in 41-28298 PFX13P repair kit.

◊ Parts are included in 41-28299 PFX13U repair kit.