Binks Trophy Automatic

binks mexico

Independientemente del tamaño del trabajo o de la pieza que esté terminando, sea cual sea el material que esté pulverizando, las pistolas pulverizadoras de la serie Binks Trophy proporcionan la tecnología y la confianza necesarias para la mayoría de los trabajos y recubrimientos. El equipo de la serie Binks Trophy proporciona toda la utilidad y versatilidad que necesita para desarrollar su plan de producción y ejecutarlo con total confianza. Cada pistola se puede configurar con la aguja y la boquilla apropiadas para acomodar el recubrimiento, el tamaño de la pieza y el tipo de superficie a terminar.

PART NODESCRIPTION
54-6120 AIR CAP RING ASSEMBLY
JGA-156-K10 SPRING-CLIP (KIT OF 10)
54-6102-K3 SEPARATOR / BAFFLE (KIT OF 3)
54-6313 SIDE PORT ASSEMBLY
54-6312 PISTON CAP
54-6311 PISTON SPRING
54-6322 PISTON ASSEMBLY
47-6860 NEEDLE, STAINLESS, MARKING: I (STANDARD)
47-6861 PAGE 7 NEEDLE, TUNGSTEN CARBIDE, MARKING: II
47-6862 NEEDLE, PLASTIC, MARKING: III
54-6320-K3 SPRING / PAD NEEDLE ASSEMBLY (KIT OF 3)
54-6309 NEEDLE ADJUSTING KNOB
54-6319 PACKING CARTRIDGE ASSEMBLY
54-6318-K3 NEEDLE PACKING, GREEN (KIT OF 3)
54-6315-K3 PACKING SCREW (KIT OF 3)
20-1359-1 SET SCREW, MOUNTING
54-308 FITTING, AIR CONNECTION, 1/4” NPS
54-6317-K3 PLUG, RECIRCULATING FLUID INLET, 1/4” HEX (KIT OF 3)
82-469 GUN BRUSH
54-6316 RECIRCULATING FITTING, 3/8” NPS (F)
54-6158 REMOTE FAN CONTROL FITTING ASSEMBLY, 3/8” NPS /BSPP(M)

STAINLESS FLUID NOZZLE ORIFICE SIZE

FLUID NOZZLE PART NUMBER

.020" .50 mm 45-11050-50
.035" .85 mm 45-11050-85
.039" 1.0 mm 45-11050-10
.047" 1.2 mm 45-11050-12
.055" 1.4 mm 45-11050-14
.063" 1.6 mm 45-11050-16
.071" 1.8 mm 45-11050-18
.079" 2.0 mm 45-11060-20
.087" 2.2 mm 45-11060-22
.102" 2.6 mm 45-11060-26
FEATHERING NEEDLE PART NO. MARKING ON THE NEEDLE MATCHING NOZZLE P/N (ORIFICE SIZE)
47-6864 I     IIII 45-11050-12   1.2MM (.047")
47-6865 II     IIII 45-11050-14   1.4MM (.055")
47-6866 III     IIII 45-11050-18   1.8MM (.071")
TC NOZZLE SIZE TC NOZZLE P.N. TC NEEDLE P.N.
1.4 MM (.055") 45-11080-14 47-6861
1.8 MM (.071") 45-11080-18 47-6861
2.2 MM (.086") 45-11080-22 47-6861
2.6 MM (.102") 45-11080-26 47-6861

CONVENTIONAL AIR CAP AND FLUID NOZZLE SELECTION CHART

  Air Cap   Air Cap Part No. Spray Pattern Range CFM @ 30 PSI CFM @ 50 PSI CFM @ 70 PSI   Fluid Nozzle   Typical Coatings
  11-C   46-6500   8 – 12"   9.8   14.2   18.7 45-11050 series, 1.0 mm – 1.8 mm Stains, Primers, Lacquers, Enamels, Acrylics, Reduced Latex
  12-C   46-6501   4 – 12"   8.3   12.1   14.2   45-11050 series, 1.0 mm – 1.8 mm Lacquers, Enamels, Top Coats, Low Viscosity Adhesives
    14-C     46-6503     8 – 14"     17.0     24.4     31.2 45-11060 series, 2.0 mm – 2.6 mm or 45-11080 Tungsten Carbide Series (VT), 1.4 mm – 2.6 mm     Zinc Rich, Adhesives, Glazes, Engobes, Ceramics, Porcelain Enamels

LVMP – LOW VOLUME MEDIUM PRESSURE AIR CAP AND FLUID NOZZLE SELECTION CHART

  Air Cap   Air Cap Part No. Spray Pattern Range   CFM @30 PSI Gun Inlet (Dynamic)   Fluid Nozzle   Typical Coatings
  22-L 46-6510 4 – 12"   11.2 45-11050 series, 0.5 mm – 1.6 mm Stains, Primers, Lacquers, Enamels, Acrylics, Reduced Latex
  23-L 46-6511 4 – 12"   10.6 45-11050 series, 1.0 mm – 1.8 mm Lacquers, Enamels, Top Coats, Low Viscosity Adhesives
  24-L 46-6512 2 – 6”   14.3 45-11050 series, 0.5 mm – 1.8 mm Small Pattern Applications of Stains, Enamels, Lacquers, Acrylics
  25-L 46-6513 4 – 15”   14.7 45-11050 series, 0.85 mm – 1.8 mm Dyes, Stains, Toners, Enamels, Lacquers, Primers, Urethanes, Solvent Coatings, Waterborne Coatings

También te podría gustar...